Advertisement
STACKED ISO DIN HEAD UNIT PROVISION
1
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A)
Slide the stacked ISO DIN units into
2
the trim plate bracket assembly and
secure the units to the kit using the
screws supplied with the head units.
(Figure B)
Position the rear support bracket
3
with slide grooves facing down and
secure to the back of the aftermar-
ket radio with the hardware supplied
with aftermarket head unit.
(Figure C)
95-5026
7
KIT ASSEMBL Y
A
B
B
Advertisement
