Advertisement
http://www.monomachines.com/
NOTE: When doing two folds, make sure that both folding tables are
pointing to an identical icon.
Your unit is capable of folding up to three pieces of 20# bond stock at one time.
This must be done by hand feeding the machine through the top of the bonnet.
NOTE: Your unit can run stapled sets, but they must be stapled parallel to
the top edge, and the staple must be centered. Also, when hand feeding
sets into the machine make sure that you use the engaging clip to hold the
feed table in the down position. If this were not done, it could cause
premature wear of the feed tire.
http://www.monomachines.com/
1501X OPERATIONAL INSTRUCTIONS
LOADING THE MACHINE- MULTIPLE PAGE SETS
Post goes
into double
fold hole
during a letter
fold.
For More Info
Click Here --->
IV
Load multiple
page sets
here, one set
at a time.
Advertisement
