Sequence Mode - JAI SP-5000M-CXP2 User Manual

7.9.

Sequence Mode

This mode allows the user to define a preset sequence of up to 10 images, each with its own ROI,
exposure time and gain values. In this mode, auto functions such as AGC, ASC, AIC and AWB are
not available.
7.9.1 Video send mode
The sequential trigger mode is selected via the Video Send Mode command and has the
following options.
Video send mode
Trigger Sequence
Command Sequence
Video Send Mode
Sequence Reset
Command
Frame Start
Trigger In
Frame Active
Out
Fig. 26
7.9.2 Sequence mode basic timing
In this mode, as each trigger input is received, the image data associated with the next
index within the preset sequence is output.
Frame Start
Trigger In
Sequence
behavior
SP-5000M-CXP2 / SP-5000C-CXP2
How to select the index
Select the index by the Frame Start trigger signal. (The setting
index can be determined by the next index setting.)
Select the index number to assign directly by the Command
Sequence Index command.
"Normal"
"Trigger Sequence"
Sequence Index
Can be changed
Cannot be changed
Sequence
Index
Execute from
Index 0
Sequence Index
Stop
Behavior if Video Send Mode is set to Trigger Sequence
Index 0
Frame count Frame count
=1
Next Index = Next Index =
Index 1
Fig. 27 Behavior of Sequence trigger
Sequence Index Sequence Index
Can be changed
"Execute"
Sequen
ce
Index
Execute
from
Index 0
Sequence Index
Performing
Index 1 Index 2
Frame count
=1 =1
Next Index =
Index 2 Index 3
- 44 -
"Normal"
"Trigger Sequence"
Sequence Index
Cannot be changed
Sequence
Index
Pointer
&
Repetition Sequence
Count
Index Execute
Clear
From Index 0
Sequence Index Sequence Index
Stop Performing
Index 3
Frame count Frame count
=1
Next Index = Next Index =
Index 4
Index 4
=1
Index 5