10.6 Other JAI custom mode
10.6.1 Video Send Mode
The Video Send Mode is the function to select how the image information will be read
out from the camera.
Normal:
Sequence Mode:
Multi Mode:
10.6.1.1 Normal: Ordinal operation
In this mode, the stream is output without any control.
10.6.1.2 Sequence Trigger Mode
This mode allows the user to define a preset sequence of up to 10 images, each with
its own ROI, Exposure time and Gain values. As each trigger input is received, the
image data within the preset sequence is output as described below.
Trigger
Sequence
Operation
This function is effective when the video send mode selector is set at the Sequence
Trigger Mode.
In Sequence Trigger Mode, the following parameters can be set.
Sequence ROI index:
Sequence ROI FrameCount:
Sequence ROI Next index:
Sequence ROI Width:
Sequence ROI Height:
Sequence ROI Offset X:
Sequence ROI Offset Y:
Sequence ROI Gain:
Sequence ROI Exposure Time: Set the exposure time
AM-800GE / AB-800GE
Ordinary operation
Sequence Trigger Mode:
Multi ROI operation
Sequence 1
Sequence 2
Fig.44 Sequential Trigger Mode
The index (ID) to which the settings will be applied
The number of frames to capture at this index
Indicate the next index (ID) in the sequence
Set the horizontal readout width
Set the vertical readout lines
Set the horizontal offset
Set the vertical offset
Set the gain
- 62 -
Sequence 3
Sequence 4