Table of Contents
Advertisement
3D camera
Parameter name
TemperatureFront2
TemperatureIllu
*has limits: parameters with this marker are listed in the reply of getAllParameterLimits method.
Default values of device config parameters
The default values of the device configuration parameters are:
Parameter name
Name
Description
ActiveApplication
PcicTcpPort
PcicProtocolVersion
IOLogicType
IODebouncing
IOExternApplicationSwitch
SessionTimeout
ExtrinsicCalibTransX
ExtrinsicCalibTransY
ExtrinsicCalibTransZ
ExtrinsicCalibRotX
ExtrinsicCalibRotY
ExtrinsicCalibRotZ
IPAddressConfig
PasswordActivated
OperatingMode
ServiceReportFailedBuffer
ServiceReportPassedBuffer Int
For all other device config parameters there are no defined default values because they are either device-
dependent (DeviceType, ArticleNumber, ArticleStatus) or volatile (UpTime, ImageTimestampReference).
48
Data type
Description
Double
readonly: Temperature measured in the device.
Unit: celsius
Measured by second sensor on imager board.
Double
readonly: Temperature measured in the device.
Unit: celsius
Measured on the illumination board.
Data type
Description
String (utf8)
"New sensor"
String (utf8)
""
Int
0
*has limits
Int
50010
Int
3
*has limits
Int
1
*has limits
Bool
true
Int
0
*has limits
Int
30
*has limits
Double
0.0
Unit: millimetres
Double
0.0
Unit: millimetres
Double
0.0
Unit: millimetres
Double
0.0
Unit: degrees
Double
0.0
Unit: degrees
Double
0.0
Unit: degrees
Int
0
Bool
false
Int
0
Int
15
15
Advertisement
Table of Contents
