IFM Electronic O3D301 Operating Instructions Manual page 47

Parameter name
SessionTimeout
ServiceReportFailedBuffer
ServiceReportPassedBuffer Int
ExtrinsicCalibTransX
ExtrinsicCalibTransY
ExtrinsicCalibTransZ
ExtrinsicCalibRotX
ExtrinsicCalibRotY
ExtrinsicCalibRotZ
IPAddressConfig
PasswordActivated
OperatingMode
DeviceType
ArticleNumber
ArticleStatus
UpTime
ImageTimestampReference Int
TemperatureFront1
Data type Description
Int Number of seconds which a session stays before a call
to "heartbeat" method is needed
*has limits
Int Number of buffers reserved for failed results
*has limits
Number of buffers reserved for passed results
*has limits
Double Extrinsic calibration, transition in X direction
Unit: millimetres
Double Extrinsic calibration, transition in Y direction
Unit: millimetres
Double Extrinsic calibration, transition in Z direction
Unit: millimetres
Double Extrinsic calibration, rotation around X axis
Unit: degrees
Double Extrinsic calibration, rotation around Y axis
Unit: degrees
Double Extrinsic calibration, rotation around Z axis
Unit: degrees
Int readonly: The GUI requires to know if the device is on
a discovery IP address for multiple-use cases. This
information was extended to reflect all kinds of IP-
address situations.
Allowed values:
0: Static (IP address explicitly defined inside the
device)
1: DHCP (using a DHCP server in the network)
2: LinkLocal (configured to DHCP, but no server which
provided an address)
3: Discovery (changed by IP4Discovery mechanism)
Bool readonly: Is true if the password protection is enabled
Int readonly: Mode of device (RUN, EDIT)
see "setOperatingMode" (the setter is outside the edit
mode but inside session)
String readonly: Delivers a type description, unique by
imager, evaluation logic and device interface.
String readonly: Official catalogue number
String readonly: Official two-letter status code
Double readonly: Hours since last reboot
readonly: This returns the current timestamp as a
reference for the timestamps in the received images.
Unit:
microseconds
Double readonly: Temperature measured in the device.
Unit: celsius Measured by first sensor on imager board.
3D camera
UK
47