When Using - Toshiba 32SL800A Owner's Manual

Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
Ambient Light
6
Press OK to confirm the adjustment.
To cancel the adjustment when selecting a point, select
Cancel and press OK�
To return the settings of all points to the factory
defaults, select Reset and press OK�
Selecting Active Backlight Control
When Active Backlight Control is activated, it will
automatically optimise the backlighting levels for dark
scenes�
1
From the Advanced Picture Settings menu, press
s or r to select Active Backlight Control�
2
Press v or w to select On or Off�
Adjusting 3D Colour Management
You can adjust picture colour quality by selecting from 6
base colour adjustments : Red, Green, Blue, Yellow,
Magenta and Cyan�
1
From the Advanced Picture Settings menu, press
s or r to select 3D Colour Management and
press v or w to select On�
3D Colour Management
2
Press s or r to select Base Colour Adjustment�
3
Press OK and press s or r to select the item you
want to adjust�
Base Colour Adjustment
Hue
Red 0
Green
0
Blue 0
0
Yellow
0
Magenta
Cyan 0
Reset
4
Press w and press s or r to select Hue,
Saturation or Brightness�
Hue
Red 0
5
Press s or r to adjust the settings as required�
Using the TV's features (General)
48
Cancel
Reset
On
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
Saturation Brightness
0 0
Note:
If you set 3D Colour Management to Off, Base
Colour Adjustment will not be available.
Resetting Base Colour Adjustment
The reset function returns base colour adjustment to the
factory settings�
1
From the Base Colour Adjustment menu, press
s or r to select Reset�
2
Press OK�
Activating MPEG NR (Noise Reduction)
If the incoming MPEG signal exhibits noise (is grainy),
depending on the compression and conversion, the noise
may be reduced when using this function�
1
From the Advanced Picture Settings menu, press
s or r to select Noise Reduction and press OK�
Noise Reduction
MPEG NR
DNR
2
Press v or w to select Off, Low, Middle or High�
Activating DNR (Digital Noise Reduction)
If the incoming signal is weak and the picture is blurry, the
picture may be improved when using this function�
1
From the Noise Reduction menu, press s or r to
select DNR�
2
Press v or w to select Auto, Off, Low, Middle or
High�
Adjusting the Static Gamma
The static gamma feature allows you to adjust the levels
of black in the picture�
1
From the Advanced Picture Settings menu, press
s or r to select Static Gamma�
2
Press v or w adjust the level�
Adjusting Resolution+
The Resolution+ feature allows you to adjust the clarity
levels for your desired picture settings�
1
From the Advanced Picture Settings menu, press
s or r until Resolution+ is selected and press OK�
2
In the Resolution+ field, select Auto�
Resolution+
Resolution+
Level
Low
Auto
Auto
3
25