Using The System Information; Local Time Settings; Performing A Software Upgrade; Auto Upgrade - Toshiba 32SL800A Owner's Manual

Using the System Information

This feature can be used to check the version of software
currently installed� When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc�
1
From the System Setup menu, press s or r until
System Information is selected�
2
Press OK to display the System Information�
System Information
TOSHIBA
2011
x.x.x.x Xxx xx 2011 - xx:xx:xx XX:xx
WEAK AVERAGE
Ch22
Ch25
Ch35
Ch46
3
For information about the signal quality of a particular
multiplex, press s or r to select that multiplex�
4
Press OK for a screen showing detailed technical
information about the selected multiplex�

Local Time Settings

• This function allows you to manually set the time zone.
Please note that if you manually change the time zone
setting, all existing entries under Programme Timers will
become invalid as they are still based on the old time
zone� It is recommended that you delete all entries under
Programme Timers before proceeding with the steps
described below�
1
From the DTV Settings menu, press s or r to
select Local Time Setting�
2
Press OK and press s or r to select Time Zone�
3
Press v or w to select the item you want to set�
(New South Wales, Northern Territory,
Queensland, South Australia, Tasmania,
Victoria, Western Australia, Australian Capital
Territory)
Local Time Setting
Time Zone
Local Time
4
Press s to select Local Time and press v or w to
set as required�
Other Digital TV features and settings
STRONG
Poor
Good
Good
Good
New South Wales
11:30

Performing a Software Upgrade

Auto Upgrade

When Auto Upgrade is set to On, the television will
automatically upgrade while in standby if new software is
available�
1
From the System Setup menu, press s or r to
select Software Upgrade and press OK�
2
Press s or r to select Over-the-air Upgrade and
press OK�
3
Press s or r to select Auto Upgrade�
4
Use v or w to select On or Off�

Searching for New Software

If preferred, software upgrades can be searched for
manually using Search for New Software�
1
From the System Setup menu, press s or r to
select Software Upgrade and press OK�
2
Press s or r to select Over-the-air Upgrade and
press OK�
3
Press s or r to select Search for New Software�
4
Press OK� The television will automatically start
searching for a software upgrade, the progress bar will
move along the line�
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found, the television will
automatically start downloading� If not, a screen will
appear stating that an upgrade is unavailable�

Network Upgrade

TOSHIBA may offer upgrades for the TV's software in
the future�
The TV's software is upgraded via the Network�
Before downloading software;
Configure your TV to connect to the Internet.
Note:
While the upgrade is being performed, you will not
be able to watch the TV.
1
From the System Setup menu, press s or r to
select Software Upgrade and press OK�
2
Press s or r to select Network Upgrade and press
OK�
39