Toshiba 32SL800A Owner's Manual page 19

Channels
Line No. 1/10
Pos. Name
□□□□□
1
□□□
2
□□□□
7
□□□
30
□□□□□□
40
□□□□□
51
□□□□
822
□□□□□
823
Line Number Jump — Press the Number button
to input the line number you want to select and press
OK�
Station Letter Jump — Press
the next station name with a different initial letter�
It is also possible to change the Position number of a
particular channel�
Renumber — Press the RED button to renumber for
the selected channel� Edit the channel number using
the Number buttons and press OK�
Pos. Name
- - - -
Move — Press the GREEN button to activate
the Move feature� Press the s or r to select the
channel you wish to move and press OK to check� If
you wish to move multiple channels at once, select
another channel and check in the same way� Repeat as
necessary�
Once all desired channels have been checked, select
s or r to place the focus at the position to which
you wish to move the channels� The channels will
be inserted above the selected channels� Press the
GREEN button to execute the move�
Channels
Line No. 1/10
Pos. Name
□□□□□
1
□□□
2
□□□□
7
□□□
30
□□□□□□
40
□□□□□
51
□□□□
822
□□□□□
823
Sort — Press the YELLOW button. A confirmation
window will appear� Press v or w to select Yes and
press OK�
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
The Sorting Type selection window will appear�
Getting started
TV
Press v or w to set the sorting rule�
Number mode:
Position No� order (numerical sequence)
A-Z Sort mode:
Station name order (A to Z)
Press s to select Sort and press OK�
Setting the Standby Channel Update
or to jump to
If the Standby Channel Update is set to On, when the
TV is in standby mode, Digital Tuning is automatically
executed and any new channels are saved�
1
From the System Setup menu select DTV
Settings and press OK�
2
Press s or r to select Standby Channel Update
and press v or w to select On�
Selecting Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"Broadcast information has changed. Would you
like to rescan now?"� Please follow the message� If
you do not wish for the TV to detect changes and prompt
you to rescan, you should set this feature to Off�
1
From the DTV Settings menu, press s or r to
select Dynamic Scan�
2
Press v or w to select On or Off�
Setting the Location
TV
You can select either Home or Store mode� Home is
recommended for normal home use� Select Store when
using a TV for displaying in a shop, etc�
1
From the System Setup menu, press s or r until
Location is selected�
2
Press v or w to select Home or Store�
Analogue switch-off
This is a digital TV which is integrated to allow the use
of both digital and analogue services� However, during
the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new
digital services�
This 'switch-off' will happen in a number of phases,
which will be advertised in your area well in advance� It is
recommended that at each phase the television is re-tuned
to ensure that existing and new digital services can be
viewed without Standby Channel Update disruption�
Sort
Sorting Type Number
Sort
- digital -
- digital -
19