Wireless Information - Toshiba 32SL800A Owner's Manual

10
Select Done and press OK�
Note:
When Encryption is None, a message will
appear. Press v or w to select Yes and press
OK.
Note:
Settings are not saved if BACK is pressed before
Done is selected.
Enhanced 11n
When Enhanced 11n is set to On, the Dual Channel
(40MHz) feature is available�
Note:
In addition, some other optional 11n features will be
enabled.
1
From the Preferences menu, press s or r to select
Network Setup and press OK� Select Wireless
Setup and press OK�
2
Press s or r to select Enhanced 11n and press v
or w to select On�

Wireless Information

The settings configured in Wireless Setup can be
confirmed.
1
From the QUICK Menu, press s or r to select
Wireless Information and press OK�
Quick Menu
Picture Size
More Information
Channel Options
Sleep Timer
REGZA-LINK Device
Speakers
Headphone Level
Wireless Information
2
The Wireless Information window will appear�
Note:
Press the RED button to scan for all available
APs (depending on the input mode will mot be
operated.).
Item
Status Connected is displayed when the TV
is connected with the AP�
Disconnected is displayed when the
TV is not connected with the AP�
Signal Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel Channel in use (1-165)
52
Connecting your TV
Wide
00:00
TV Speakers
30
Description
Item
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC The AP's MAC address is displayed
Address when the TV is connected with the AP�
USB MAC The MAC address of the USB (Dual
Address Band WLAN Adaptor) is displayed�
DHCP
Enabled is displayed when using
DHCP�
Disabled is displayed when not using
DHCP�
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default Gateway Address of the Default GATEWAY
DNS Address of the DNS
Note:
Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value
might be low. It is recommended that Encryption
be changed to AES.
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz band for audio and video
streaming if bit rate of content is 10Mbps or less.
• It is recommended to use IEEE 802.11n on 5 GHz
band for video streaming if bit rate of content is
20 Mbps or less.
• It is not recommended to use 2.4 GHz band for
audio and video streaming.
• Content playback may not be interrupted by
various network interference.
• Some contents on internet playback may be
interrupted.
Advanced Network Setup
Notes:
• When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On or
Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off,
set Auto Setup to Off, and set the IP Address
manually.
Description