Plug Replacement - Worx WX153 Safety And Operating Manual

PLUG REPLACEMENT

(UK & IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPoRtANt
The wires in the mains lead are colored in
accordance with the following code:
BlUe=NeUtRAl
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected
to the terminal which is marked with N.
The wire which is colored brown must be
connected to the terminal which is marked
with L.
WARNING!Never connect live or
neutral wires to the earth terminal of
the plug. Only fit an approved 13ABS1363/A
plug and the correct rated fuse.
Note: If a moulded plug is fitted and has
to be removed take great care in disposing
of the plug and severed cable, it must be
destroyed to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cordless drill
BRoWN=lIve
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
WX153 WX158 WX165 WX365 WX365.1 WX369
WX369.1 WX369.2 WX376 WX376.1 WX376.2