Troubleshooting - Zanussi ZOP38903 User Manual

screen-printing zones is not rough when you
touch it.
A B C
Make sure that you install the middle panel of
glass in the seats correctly.

Troubleshooting

WARNING!
Refer to Safety chapters.
What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
www.zanussi.com
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
The back lamp
1. Turn the lamp glass cover counterclockwise
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
4. Install the glass cover.
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The automatic switch-off is acti-
vated.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
CAUTION!
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
deactivate the circuit breaker.
to remove it.
heat-resistant lamp.
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Refer to "Automatic switch-off".
Remedy
21