Removing The Shelf Supports - Zanussi ZOP38903 User Manual

Hide thumbs Also See for ZOP38903:
Table of Contents

Advertisement

• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can cause
damage to the nonstick coating.
Stainless steel or aluminium appliances
Clean the oven door with a wet
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean the
oven control panel with the same
precautions.

Removing the shelf supports

To clean the oven, remove the shelf supports.
1
Pull the front of the
1
shelf support away
from the side wall.
Install the shelf supports in the opposite
sequence.
Pyrolysis
CAUTION!
Remove all accessories and
removable shelf supports.
Do not start the Pyrolysis if you did not fully
close the oven door.
WARNING!
The appliance becomes very hot.
There is a risk of burns.
www.zanussi.com
2
1
2
Pull the rear end of
2
the shelf support
away from the side
wall and remove it.
CAUTION!
If there are other appliances installed
in the same cabinet, do not use
them at the same time as the
Pyrolysis function. It can cause
damage to the appliance.
To remind you that the Pyrolysis is
necessary, PYRO flashes in the
display for 15 seconds after each
activation and deactivation of the
oven. For as long as no complete
cleaning function is carried out,
cleaning reminders come on in the
display each time the oven is
activated or deactivated.
1. Remove the worst dirt manually.
2. Press
again and again until the display
shows
.
• The display shows P1 and
the other.
• An acoustic signal sounds as a reminder
to remove all accessories and shelf
supports from the appliance.
• The clock display shows 1:30.
• Duration
flashes.
3. When
flashes, press
necessary procedure:
Option
P1
P2
4. Press
to start the procedure.
The bars on the symbol
to show that the temperature in the appliance
increases.
The symbol
flashes.
After some minutes the door locks. The display
shows the symbol
one after
or
to set the
Description
If the oven is not
very dirty. Time
of the proce-
dure: 1 h 30 min.
If the oven is
more dirty. Time
of the proce-
dure: 2 h 30 min.
come on one by one
.
19

Advertisement

Table of Contents
loading

Table of Contents