This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices.
Surround modes and surround parameters
This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of "Speaker Config." (vpage 37).
Surround mode (vpage 21)
Front L/R
DIRECT (2-channel)
S
DIRECT (Multi-channel)
S
STEREO
S
MULTI CH IN
S
DOLBY PRO LOGIC g
S
DTS NEO:6
S
DOLBY DIGITAL
S
DOLBY DIGITAL Plus
S
DOLBY TrueHD
S
DTS SURROUND
S
DTS 96/24
S
DTS-HD
S
DTS Express
S
MULTI CH STEREO
S
VIRTUAL
S
z1 Only when "SW Mode" is set to "LFE+Main" (vpage 38), sound is output from the subwoofer.
z2 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z3 This item can be selected when a Dolby Digital or DTS signal is played.
z4 This item can be selected when a Dolby TrueHD signal is played.
z5 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.