Denon AVR-X500 Owner's Manual page 21

Default settings
Block (A – G)
and Default Settings
Channel (1 – 8)
87.50 / 89.10 / 98.10 / 108.00 / 90.10 /
A1 – A8
90.10 / 90.10 / 90.10 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 – B8
90.10 / 90.10 / 90.10 MHz
90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 /
C1 – C8
90.10 / 90.10 MHz
90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 /
D1 – D8
90.10 / 90.10 MHz
90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 /
E1 – E8
90.10 / 90.10 MHz
90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 /
F1 – F8
90.10 / 90.10 MHz
90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 /
G1 – G8
90.10 / 90.10 MHz
DVD
n Listening to preset stations
1
SHIFT
Press to select the memory
block (A to G).
TUNER
Preset Channel
A8 FM 90.10MHz
A7 FM 90.10MHz
A6 FM 90.10MHz
A5 FM 90.10MHz
A4 FM 108.00MHz
A3 FM 98.10MHz
A2 FM 89.10MHz
A1 FM 87.50MHz
TUNE Tuning BAND Band MODE Mode
CHANNEL Preset MEMORY Memory
2
CHANNEL + CHANNEL –
Press or
preset channel.
You can also operate via the main unit. In this case, perform the
following operations.
TUNER PRESET CH + TUNER PRESET CH –
Press or
radio station.
18
RDS (Radio Data System)
Note that the RDS function only works when receiving RDS compatible
stations.
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH will not function in areas in which
there are no RDS broadcasts.
to select the desired
to select a preset
Tuning in radio stations