Denon AVR-X500 Owner's Manual page 46

Tone
Adjust the tonal quality of the sound.
1
TONE
Press .
Tone
Tone Control Off
ENTER Enter
2
o p
Use to select "On".
On Allow tone adjustment (bass, treble).
Off
Playback without tone adjustment.
NOTE
The tone cannot be adjusted in the DIRECT mode.
3
ui
Press to select an item to be set, and use
Adjust bass.
Bass
• –6dB – +6dB (0dB)
Treble Adjust treble.
• –6dB – +6dB (0dB)
"Bass" or "Treble" can be set when the menu "Tone Control" setting is "On".
DVD
around items indicate the settings made upon purchase.
BACK Return
o p
to select a setting value.
NIGHT MODE
Optimized setting for late-night listening.
• If you do not press any button for approximately 5 seconds, the menu screen light turns off.
NIGHT
Press to select your desired mode.
ENTER
Set the adjusted value to "Low".
Low
Mid Set the adjusted value to "Middle".
Set the adjusted value to "High".
High
Not set.
Off
When a Dolby TrueHD signal is output, "DRC" is displayed on the TV screen.
The setting mode is also changed as shown below.
Set the adjusted value to "Low".
Low
Mid Set the adjusted value to "Middle".
High Set the adjusted value to "High".
Auto Automatic dynamic range compression on/off control according to the source.
Off Not set.
43
Adjusting the sound field effects
around items indicate the settings made upon purchase.
D.Comp:Off