Connecting A Portable Player - Denon AVR-X500 Owner's Manual

Connecting a portable player

If a portable player is connected via the PORTABLE input jack of the
unit, music from the portable player can be played.
Portable
player
AUDIO
AUDIO
OUT
DVD
Connecting an FM/AM antenna
• Connect the FM antenna or AM loop antenna supplied with the unit
to enjoy listening to radio broadcasts.
• After connecting the antenna and receiving a broadcast signal
(vpage 17 "Listening to FM/AM broadcasts"), fix the antenna
with tape in a position where the background noise level becomes
minimal and the sound quality is most clear.
Direction of
broadcasting station
AM loop antenna
(supplied)
White
Black
q w e
AM outdoor
Ground
antenna
13
n AM loop antenna assembly
1
Put the stand section
through the bottom of the
loop antenna from the
rear and bend it forward.
2
Insert the projecting part
into the square hole in
FM outdoor
the stand.
antenna
75 Ω/ohms
coaxial cable
n Using the AM loop antenna
FM indoor
Suspending on a wall
antenna
(supplied)
Suspend directly on a wall without assembling.
Standing alone
Use the procedure shown above to assemble.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
• If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
• If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.
Connecting other devices
Stand
Square
hole
Loop
Projecting
antenna
part
Nail, tack, etc.