Tuning In Radio Stations - Denon AVR-X500 Owner's Manual

Tuning in radio stations

For antenna connections, see "Connecting an FM/AM antenna"
(vpage 13).
How to tune in
The modes for receiving FM/AM broadcasts consists of "AUTO"
mode that automatically searches available broadcast stations and
"MANUAL" mode that lets you tune in using buttons to change the
frequency. The default setting is "AUTO".
In "AUTO" mode, you cannot tune in to radio stations if the reception
is not good. If this is the case, then use the "MANUAL" to tune in.
Listening to FM/AM broadcasts
1
TUNER
Press to switch the input
source to "TUNER".
2
BAND
Press to select "FM" or
"AM".
FM When listening to an FM broadcast.
When listening to an AM broadcast.
AM
GTV ScreenH
TUNER
AUTO
Now Playing
FM 87.50MHz
A1
TUNE Tuning BAND Band MODE Mode
CHANNEL MEMORY
Preset Memory
GDisplay of this unitH
A1 FM 87.50MHz
DVD
3
Tune in the desired broadcast station.
AUTO Automatically tune to the station.
q Press MODE to select "AUTO".
MODE:AUTO
TUNE + TUNE –
w Press or to select the station you want to
hear.
• The frequency changes in steps each time the button is
pressed.
MANUAL Manually tune to the station.
q Press MODE to select "MANUAL".
MODE:MANUAL
TUNE + TUNE –
w Press or to select the station you want to
hear.
• The frequency changes in steps each time the button is
pressed.
When tuning in stations manually, press and hold
TUNE – to change frequencies continuously.
17
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 34). If "Auto Preset" is performed after performing
"Manual preset", the "Manual preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
MEMORY
Press .
GTV ScreenH
TUNER
To store preset:
select A1-G8
SHIFT CHANNEL MEMORY
TUNE Tuning BAND Band
CHANNEL Preset MEMORY Memory
GDisplay of this unitH
Storing Station
TUNE +
or
3
CHANNEL +
Press or
number.
SHIFT
• Press , and then the block (A – G) can be selected.
4
MEMORY
Press again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
A1
MODE Mode
CHANNEL –
to select the preset