Denon AVR-X500 Owner's Manual page 45

Setting items
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : 0dB
• DTS movie sources : 0dB
• DTS music sources : –10dB
Center Image 0.0 – 1.0 (0.3)
Distributes the dialogue
The smaller the value, the more dialogue is concentrated on the center
output from the center
channel. The larger the value, the more dialogue is distributed to front
channel to the front left and
left and right channels, and the more the sound image widens in the
right channels and widens
front.
the sound image in the
front. You can set this when
the surround mode is set to
DTS NEO:6 in the "Music"
mode.
Panorama On : Set.
Assign front L/R signal to Off : Do not set.
also go to the surround
channels for wider sound.
You can set this when the
surround mode is Dolby PLg
in the "Music" mode.
Dimension 0 – 6 (3)
Shift sound image center
As you set a smaller number, the surround sound field shifts backward;
to front or rear to adjust
as you set a larger number, the surround sound field shifts forward.
playback balance. You can
set this when the surround
mode is set to Dolby PLg in
the "Music" mode.
DVD
Setting details Setting items
Center Width 0 – 7 (3)
Distributes the dialogue
The smaller the value, the more dialogue is concentrated on the center
output from the center
channel. The larger the value, the more dialogue is distributed to front
channel to left and right
left and right channels, and the more the sound image widens in the
channels and widens the
front.
sound image in the front.
You can set this when the
surround mode is set to
Dolby PLg in the "Music"
mode.
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the surround mode is "DIRECT" (vpage 23) and
the "SW Mode" (vpage 38) is "LFE+Main".
Default Yes : Reset to the defaults.
The "Audio Adjust" settings No : Do not reset to the defaults.
are returned to the default
settings.
42
Adjusting the sound field effects
Setting details