Denon AVR-X500 Owner's Manual page 43

HDMI
Makes settings for HDMI.
Setting items
HDMI Audio Out AVR : Play back through speakers connected to the unit.
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
If "TV" is selected, only an HDMI audio signal is output from the TV.
Pass Through On : Passes the selected HDMI input through the AV receiver's HDMI
Selects how the AV receiver output when the AV receiver is in standby power mode.
will pass HDMI signals to Off : No HDMI signals are passed through the AV receiver's HDMI output
the HDMI output in standby in standby power mode.
power mode.
When this setting is enabled, the "Sleep timer function" (vpage 30)
is turned "Off" and the "Auto Standby"
disabled.
NOTE
When "Pass Through" is set to "On", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
Pass Source Last : Choose this option to "pass through" the last used HDMI input
The AV receiver will "pass video source.
CBL/SAT / Blu-ray / GAME / AUX : Choose one of these HDMI sources
through" the sources HDMI
signal when in standby. to be passed through when the AV receiver is in standby.
DVD
Default settings are underlined.
Setting details
(vpage 40) setting is
Other
Make various other settings.
Setting items
Auto Standby 2Hours : The unit goes into standby after 2 hours.
When you do not perform 4Hours : The unit goes into standby after 4 hours.
any operation on this unit 8Hours : The unit goes into standby after 8 hours.
Off : The unit does not go into standby automatically.
with no audio or video input
for a specified time, this
unit automatically enters
the standby mode. Before
it enters the standby mode,
"Auto Standby" is displayed
on the display of this unit
and the menu screen.
Setup Lock On : Turn protection on.
Protect settings from Off : Turn protection off.
inadvertent changes.
To turn "Off" the "Setup Lock", follow the
procedure below.
q Press and hold
"Setup Lock:0On 1" appears on the display.
o p
Use
w
ENTER
NOTE
When "Setup Lock" is set to "On", the settings listed below can no
longer be changed. Also, "Setup Lock!" is displayed if you attempt to
operate related settings.
• Setup menu operations
• RESTORER
40
Default settings are underlined.
Setting details
SETUP
for at least 3 seconds.
to select "Off", and then press
.
• Levels
• Audio Adjust
General
ENTER
etc.