Mini-PCI Option
Use the following steps to remove the Mini-PCI option from the system.
Remove the keyboard and front cover from the system.
1.
Remove the screw from the securing bracket. Lift the securing bracket and remove from the
2.
slit in the main board.
3.
Partially lift the Mini-PCI option up and away from the main board and disconnect it from
connector P9.
Disconnect the cables from connectors P10 and P11 of the main board.
4.
Pull the Mini-PCI option towards the front of the system to release it from the securing tabs.
5.
CMOS Battery
Use the following procedure to remove the CMOS battery from the system.
Remove the keyboard, front cover, PC card assembly, and Mini-PCI option (if present)
1.
from the system.
2.
Disconnect the CMOS battery from connector P19 of the main board.
Lifting the Mini-PCI option
A – Securing Tab
Disassembly and Reassembly 3-21