NEC Versa LXi Service And Reference Manual page 45

4. Gently lift up the edge of the keyboard nearest the LCD and slide the keyboard toward the
LCD screen to release the tabs that secure it.
from the system.
5. Gently rest the keyboard on top of the base unit to view and access the dip switch block. Be
careful not to twist or disconnect the keyboard cable.
Locate the dip switch block. Using a fine-tipped object, change switch 5 to "ON" to enable
6.
the BIOS flash.
can damage the system.
2-24 System Configuration and Setup
Lifting the keyboard
Be careful not to disconnect the keyboard or keyboard cable entirely
Never use a pencil to change switch settings. Residue from the pencil
BIOS flash switch enabled
Dip switches 2, 3, 4, and 5 set to "On."