NEC Versa LXi Service And Reference Manual page 58

2. Turn over the system and locate the memory module bay.
A – Screw
3. Remove the screw and bay cover.
4. Locate the SO-DIMM expansion port and proceed as follows:
!
!
3-8 Disassembly and Reassembly
Locating the memory module bay
Hold the SO-DIMM at a 45 degree angle and align the SO-DIMM contacts with the
socket in the system. Push the connector into the socket.
Press down on the edge of the SO-DIMM opposite the contacts until the lock tabs on
the sides snap into place, securing the module.
Installing the SO-DIMM
B – Memory Module Bay Cover