3G/4G Configuration In Windows 10 - Eluktronics PRO17SE User Manual

3G/4G Configuration in Windows 10

You can configure a 3G/4G connection as below, however make sure the system is not in Airplane Mode before
configuration begins.
1. Click the Settings item in the Start Menu and then click Network and Internet.
2. Click Cellular a list of available access points will appear.
3. Click the access point and click Connect.
4. The system will connect to your network.
5. Connected will appear under the connection.
6. You can then access the internet, download e-mail etc. as per any internet connection.
7. To disconnect you can select the connection and click Disconnect.
8. You need to use Airplane Mode aboard aircraft.
9. You can also click the Wireless icon
access point connect to access the connection information.
in the notification area of the taskbar, click Cellular and double-click an
Windows 10
3G/4G Module E - 33