Table of Contents
Advertisement
Operating Instructions
( Available with RS-485 model only )
TIP
Setting for RS-485 Communication with PTZ Controller
● Enter the MENU :
Press buttons 9+5+PSET (PRESET)
● Set the Preset Zoom :
Press buttons 1(or ~4)+PSET (PRESET)
● Move the cursor in the MENU :
Moves UP/DOWN/LEFT/RIGHT Joy stick
● Select or Choose value in the MENU :
Press button OPEN (IRIS OPEN)
● D-Zoom IN : Press button TELE
● D-Zoom OUT : Press button WIDE
● Exit the Preset Zoom mode :
Press buttons 3+4+PSET (PRESET)
Detail Function Description
▐ SMART MOTION ZOOM
SMART MOTION ZOOM enlarges the area defined by a yellow window
to a full sized image when motion is detected in the black window.
SMART MOTION ZOOM window can be re-sized by adjusting D-ZOOM RATIO
and moved by H-POINTER and V-POINTER.
UNLIKE the conventional zoom which can zoom in/out the center area of image
only, by the flexible zoom location and area, SMART MOTION ZOOM differentiates
its usefulness from others.
That is, a conventional camera installed in a corner of the ceiling can zoom the
center of the floor in a room and result in losing the image of a door on the side
wall. However, SMART MOTION ZOOM can be set to see the door side and zoom
in that area without missing the IMPORTANT security point.
1
3
20
4
Advertisement
Table of Contents
