Vitek VTC-C2BTS2 Manual page 13

Operating Instructions
FOCUS Adj. menu is a unique and patented feature that helps
focus by simulating DAY &NIGHT conditions.
Set zoom first and adjust focus to get best picture while switching between DAY
& NIGHT.
• DN DWELL (5s) : ICR switcher switches DAY & NIGHT at the interval of D/N
DWELL.
• POP ON FOCUS (OFF) : ON zooms into the center of the picture at 2X for
better focusing.
• FOCUSING STATUS (ON) : Shows how exactly focus is set. When blue bar
doesn't show up, try the lens focus to NEAR and FAR. The maximum blue bar
indicates the best focusing position.
4. SCENE ENHANCE
: Refer to 'DIRECT CONTROL MENU' table.
MENU
1. EXPOSURE
2. LENS
3. FOCUS ASSIST
4. SCENE ENHANCE
5. 3D-NR
6. DAY/NIGHT
7. PICT ADJUST
8. SPECIAL
9. SYSTEM
A. EXIT
• NORMAL (default):
Optimized for normal indoor and outdoor lighting conditions.
• WDR : Select from LOW, MID and HIGH
• D-WDR : Select from LOW, MID and HIGH
• BLC : Set the BLC area by H-POS, V-POS, H-SIZE and V-SIZE.
• HLC : Set the level up to 20
5. 3D-NR
(default: MID)
3D-NR is a very sophisticated and powerful time-based noise reduction
technology by monitoring the noise for the several video frames and defining
and eliminating them consecutively at low light.
V3.xx
DC
WDR
MID
EXT
SAVE&EXIT
13
WDR
WDR LEVEL MID
RETURN
RET