Vitek VTC-C2BTS2 Manual page 10

FULL-HD MEGA-PIXEL CAMERA
Operating Instructions
NORMAL
SCENE
ENHANCE
3D-NR MID
DAY/NIGHT EXT
for
IR LED
PICT ADJUST
SPECIAL
SYSTEM
EXIT
D-WDR – Improves the visibility by compensating the video gain for
the dark area. Noise can increase in the dark area accordingly.
BLC – Improves the visibility for dark objects by bright back
light. Outside area of BLC window can over saturate.
BLC has a target window for compensation and its size and position
can be set by H-POS, V-POS, H-SIZE and V-SIZE.
HLC – Cuts out the bright area with a black mask and excludes it from
compensation. Lower HLC LEVEL cuts out video from lower light levels
(more sensitive).
OFF, LOW, MID and HIGH.
DAY/NIGHT is used to control the setting during day-time and night-time
operation. Select the mode according to the lighting conditions and the
camera type. SMART (DYNAMIC) IR can be set to reduce the saturation
by strong IR illumination at night in any menu. Setting SMART
(DYNAMIC) IR in any menu is identically applied to other menu. Zero(0)
turns off SMART (DYNAMIC) IR and High setting decreases the
saturation but the corners will be darker accordingly.
EXT – DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXT.
AUTO – Used when DAY or NIGHT is determined by light level through the
lens and DAY from/to NIGHT is switched automatically by the scene
brightness. D↔N THRESHOLD, D↔N DELY and SMART (DYNAMIC) IR
can be set in the menu. When EXPOSURE>AGC is less than 10,
DAY/NIGHT AUTO is disabled and forcibly switches to ___(DAY) to avoid
malfunction. EXT, B/W (NIGHT) and COLOR (DAY) is independent on AGC
level. When EXTERNAL IR LED is used with NON IR LED model, please
set to IR LED MODE ON.
B/W(NIGHT) – Removes IR cut filter and switches to B/W regardless of
light level.
COLOR(DAY) – DAY/NIGHT is disabled and outputs color video.
Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAMMA, SHADING
Sets MIRROR/FLIP, PRIVACY, MOTION, PIXEL DEFECT, TITLE SET,
DISPLAY, DEFOG, POINTING ZOOM, PRESET ZOOM
Sets TV SYSTEM, RESOLUTION, COMM.SETUP, LANGUAGE,
VIDEO OUTPUT SELECT and FACTORY DEFAULT
SAVE & EXIT – Exits the menu after saving the parameters.
EXIT – Exits the menu without saving.
10