Table of Contents
Advertisement
Quick Links
FEATURES:
• 1/2.8" Sony® Exmor Progressive Scan CMOS Sensor
• 2.1 MegaPixel with Full 1080p/720p TVI Output
• Sensitivity of 0.0009 Lux
• Smart Motion Zoom tracks motion, then intelligently zooms into that area of
the frame
• 3D-DNR Digital Noise Reduction
• CVBS (Analog) Output by BNC
• True Day/Night by ICR - Dual Filter Switch
• Fully programmable True WDR (Dual Scan)
• Advanced OSD Functions: NORMAL, WDR, D-WDR, 3DNR, Motion Detection,
Privacy Mask, D-Zoom(~8x), Sens-up(x32), Flickerless, BLC/HLC, Defog,
Pixel Defect Compensation, Title Set, LSC, Deblur, Flip
• External control via RS-485
• Low active TTL input from External IR illuminators
• 12VDC / 24VAC Dual Voltage Operation
VTC-C2BTS2
2.1MP Smart TVI WDR
Box Camera
Advertisement
Table of Contents
Related Manuals for Vitek VTC-C2BTS2
Summary of Contents for Vitek VTC-C2BTS2
- Page 1 VTC-C2BTS2 2.1MP Smart TVI WDR Box Camera FEATURES: • 1/2.8” Sony® Exmor Progressive Scan CMOS Sensor • 2.1 MegaPixel with Full 1080p/720p TVI Output • Sensitivity of 0.0009 Lux • Smart Motion Zoom tracks motion, then intelligently zooms into that area of the frame •...
-
Page 2: Safety Precaution
Safety Precaution To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). - Page 3 Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing areas where has shock or vibration which results in the problems. Pay attention to safety when laying the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in.
-
Page 4: Table Of Contents
Contents p.02~03 Safety Precaution p.04 Contents p.05 Features p.06 Composition p.06 Dimensions p.07 Part Names p.08 Installation Instructions p.09~22 Operating Instructions p.23 Specifications... -
Page 5: Features
Features Key Features • Full HD, 2Mega Pixel HD-TVI CAMERA, 1920x1080(30p) • TVI Video Transmission Distance over Coax.; 500M (RG59, 75Ω) *depending on cable condition and characteristics • Automatically removable IR Cut filter by Dual filter switcher • CS mount supported (Option: C-mount adaptor) •... -
Page 6: Composition
Composition Dust Protection Cap (1pc) Torque Wrench: 3mm (1pc) Operating Standard Box Camera Instruction Dimensions 2.99” 2.99” 3.5”... -
Page 7: Part Names
Part Names Mount Holes (Top / Bottom) Rear Case Front Case Dust Protection Cap Torque Wrench PIN 4 PIN 2 Lens Connector for Auto Iris lenses Back focus DC Iris adjustment Damp(-) Damp(+) Drive(+) PIN 3 PIN 1 REAR VIEW ①... -
Page 8: Installation Instructions
Installation Instructions Installation Instructions • Care should be taken that the cable is NOT damaged, kinked or exposed in a hazardous area. • Do not point the camera lens directly at the sun or a spot light. • The camera has a 1/4” thread insert on top and bottom for mounting the camera to a wall or ceiling with a corresponding mount. -
Page 9: Operating Instructions
Operating Instructions OSD menu Startup Press ‘●’(OSD menu Joy stick key) down for about 2 seconds to access the setup menu mode. • RET : Returns to the previous menu. • EXIT : Exits the menu setting without save. • SAVE&EXIT : Exits the menu setting with save. MENU V3.xx 1. - Page 10 FULL-HD MEGA-PIXEL CAMERA Operating Instructions NORMAL SCENE D-WDR – Improves the visibility by compensating the video gain for ENHANCE the dark area. Noise can increase in the dark area accordingly. BLC – Improves the visibility for dark objects by bright back light.
- Page 11 Operating Instructions 1. EXPOSURE EXPOSURE SHUTTER AUTO |:::::::|::::::| 10 BRIGHTNESS SENS-UP |:::::::|::::::| 12 RETURN 1-1. SHUTTER (default: AUTO) : Set SHUTTER MODE to AUTO, MANUAL and Flickerless. MANUAL and Flickerless modes disable SENS-UP functions. • AUTO: Optimizes the video level by controlling the iris and the shutter speed automatically.
- Page 12 Operating Instructions 2. LENS Select either DC or MANUAL lens. Lens MUST be set to DC for the best image when DC iris lens is installed MANUAL NORMAL MODE DEBLUR MODE RETURN RETURN 2-1. DC (default: DEBLUR for None LED type) : Select lens mode according to installation.
- Page 13 Operating Instructions FOCUS Adj. menu is a unique and patented feature that helps focus by simulating DAY &NIGHT conditions. Set zoom first and adjust focus to get best picture while switching between DAY & NIGHT. • DN DWELL (5s) : ICR switcher switches DAY & NIGHT at the interval of D/N DWELL.
- Page 14 Operating Instructions Higher setting reduces more noise but results in losing sharpness, and tail effects or motion blur may occur. 6. DAY / NIGHT : Refer to ‘DIRECT CONTROL MENU’ table. Default setting are EXT for IR-LED types and AUTO for None IR LED types. D/N AUTO |::::::::::::::| 0 SMART IR...
- Page 15 Operating Instructions 7-2. SHARPNESS : Adjusts the sharpness of video(0~20). (default: 10) 7-3. COLOR GAIN : Adjusts the color level of video(0~20). (default: 10) 7-4. GAMMA : Adjusts the gamma of video. (default: 0.5) 7-5. SHADING (default: OFF) ON enables to compensate the shade caused by wide lens setting. 8.
- Page 16 Operating Instructions 7-3. MOTION (default: OFF) : MOTION can detect the changes in the motion window and displays the results in blocks and/or a text message. • SENSITIVITY : Adjusts the detection sensitivity for motion. Higher value increases the sensitivity to detect small motion easier. Too low of sensitivity will cause erratic detection.
- Page 17 Operating Instructions • EXECUTE ‘ ’: Long pressing will execute the pixel calibration for the detected pixels. Menu will exit automatically after compensation. 8-5. TITLE SET : Camera title(name) can be set and edited up to 15 alpha numeric and symbolic characters from ASCII codes(ENGLISH only).
- Page 18 Operating Instructions • D-ZOOM RATIO: Set the D-Zoom Ratio from DX 1.1~DX5.0 • STAYING ZOOMING : Sets the duration time for preset zoom area. CAUTION • Set the direction of video by MIRROR/FLIP before POINTING ZOOM setting. Otherwise location of zoom center could be different from your intention. •...
- Page 19 Operating Instructions 9-4.UTC CONTROL (default: AUTO) : Camera can be adjusted through DVR using Up-the-Coax(UTC) communication with PELCO-C protocol. Select AUTO, PELCO-C or OFF • AUTO : The camera will automatically detect the PELCO-C protocol. • PELCO-C : Camera can detect PELCO-C protocol only. [Note] AUTO only supports the PELCO-C protocol of verified DVRs.
- Page 20 Operating Instructions ( Available with RS-485 model only ) Setting for RS-485 Communication with PTZ Controller ● Enter the MENU : Press buttons 9+5+PSET (PRESET) ● Set the Preset Zoom : Press buttons 1(or ~4)+PSET (PRESET) ● Move the cursor in the MENU : Moves UP/DOWN/LEFT/RIGHT Joy stick ●...
- Page 21 Operating Instructions SMART MOTION ZOOM H-POINTER V-POINTER D-ZOOM RATIO MZ2.0 MOTION CHK CUNT RETURN • H-POINTER (10): Moves MOTION ZOOM area(Yellow window) horizontally. • V-POINTER (10):Moves MOTION ZOOM area(Yellow window) vertically. • D-ZOOM RATIO (MZ2.0): Sets the area size to be digitally zoomed when motion occurs in the black window.
- Page 22 Operating Instructions POINTING ZOOM H-POINTER V-POINTER RETURN • H-POINTER (10): Sets the horizontal location of area to be zoomed by POINTING ZOOM. • V-POINTER (10) : Sets the vertical location of area to be zoomed by POINTING ZOOM * SMART MOTION and POINTING ZOOM VS. Conventional Zoom Smart Motion and Pointing Zoom Conventional Zoom...
-
Page 23: Specifications
Detailed Specifications Imaging Sensor 1/2.8” Sony Exmor Progressive Scan CMOS Sensor Video Output HD-TVI by BNC - CVBS by BNC Resolution 2.1 MegaPixel (1080p / 720p) Effective Pixels 1920(H) x 1080(V) x 30p S/N Ratio More than 50dB (AGC Off) Sensitivity 0.0009 Lux @ (AGC 12, DSS x2) Lens Type... - Page 24 ConSIDeR THeSe oTHeR GReaT PRoDuCTS fRoM VT-SHP916 SpireHD 16 Channel Real Time Tribrid TVI / AHD / 960H Digital Video Recorder • Supports High Resolution TVI, AHD, and 960H Cameras • 16 Video Inputs with 1 HDMI, 2 Spot Monitor Outputs, and 1 VGA output •...
- Page 25 (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.
- Page 28 Version 1.0 28492 Constellation Road ValenCia, Ca 91355 November 2015 WWW.ViteKCCtV.CoM...