Table of Contents
Advertisement
Operating Instructions
• EXECUTE ' ': Long pressing will execute the pixel calibration for the detected
pixels. Menu will exit automatically after compensation.
8-5. TITLE SET
: Camera title(name) can be set and edited up to 15 alpha numeric and symbolic
characters from ASCII codes(ENGLISH only). ▲,▼,◀,▶ moves the cursor to
next input.
Choose a character and ' 'selects it. The selected characters are added
and displayed on the top left Corner and the cursor moves right automatically
for next input.
• SP - Space is inserted when pressed '●'
• BS – Cursor moves back when pressed '●'
• CLR – Clears all the characters on input line when pressed '●'.
• POS – To be able to set the title position by ▲,▼,◀,▶ and ●.
8-6. DISPLAY
: Enables or disables the OSD display.
• ID : ON enables camera ID display defined by SYSTEM>COMM.
SETUP>CAM ID.
• TITLE : ON enables to display the camera title(name) set by SPECIAL>
TITLE SET.
• D-ZOOM RATIO : ON enables to display the zoom ratio on the bottom right
corner. DZx.x will display by multiplying the actual digital zoom ratio.
8-7. DEFOG
(default: OFF)
• AUTO : Enhance foggy video automatically according to status of scene.
• MANUAL : Sets to enhance foggy video manually regardless of status
of scene.
• LEVEL : LOW, MID, HIGH
Video quality can be less in normal environments.
8-8. POINTING ZOOM
ON enables to set off-centered location to be the center of zoom H-POINTER,
V-POINTER- Able to set the location of zoom center D-Zoom is available
DZx1.1~x8.0
(See page No.22 "POINTING ZOOM")
8-9. PRESET ZOOM
Able to zoom into a preset location using the PTZ functions.
• ZONE NUM : Select Preset zone number 1~4.
• ZONE VIEW : ON displays selected zone preset view.
• H-POS and V-POS : Adjust the size and position the preset zone.
17
Advertisement
Table of Contents
