Vitek VTC-C2BTS2 Manual page 14

Operating Instructions
Higher setting reduces more noise but results in losing sharpness, and tail
effects or motion blur may occur.
6. DAY / NIGHT
: Refer to 'DIRECT CONTROL MENU' table.
Default setting are EXT for IR-LED types and AUTO for None IR LED types.
EXT
SMART IR
IR LED CONTROL
RETURN
7. PICT ADJUST
PICTURE
WHITE BAL
SHARPNESS
COLOR GAIN
GAMMA
SHADING
RETURN
7-1. WHITE BAL
(default: ATW)
: ATW, ATWext, ONE PUSH and MANUAL are available for the white balance
modes.
• ATW: White balance is continuously working along with the color temperature
changes in the range of 2,000K~8,500K.
• ATWext: White balance is continuously working along with the color temperature
changes in the range of 1,800K~11,000K.
• ONE PUSH : White balance works only during ● is pressed.
• MANUAL: White balance is fixed to the settings by R_GAIN and B-GAIN.
This mode can be used only when the color temperature does not vary.
|::::::::::::::| 0
D<->N THRESHOLD
AUTO D<->N DELAY
SMART IR
RET
RETURN
ATW
|:::::::|::::::| 10
|:::::::|::::::| 10
0.50
OFF
RET
14
D/N AUTO
HIGH
10s
|::::::::::::::| 0
RET