Vitek VTC-C2BTS2 Manual page 19

Operating Instructions
9-4.UTC CONTROL
: Camera can be adjusted through DVR using Up-the-Coax(UTC)
communication with PELCO-C protocol.
Select AUTO, PELCO-C or OFF
• AUTO : The camera will automatically detect the PELCO-C protocol.
• PELCO-C : Camera can detect PELCO-C protocol only.
[Note]
AUTO only supports the PELCO-C protocol of verified DVRs. If the
communication does not work with AUTO well, switch to PELCO-C.
9-5. LANGUAGE
(default: ENG)
: 8 languages are available for ENGLISH, JAPANESE, GERMAN, FRENCH,
ITALIAN, SPANISH, POLISH and TURKISH.
When changing LANGUAGE, select language and press ☟to load.
9-6. OUTPUT SELECT
: Selects the video output TVI or CVBS.
[Note]
- Switching the video format : ▲,▼, ▲,▼,
Do not power off the camera after switching a video format immediately.
It can be cause of crashing a flash memory.
- If set to CVBS video output, UTC Control setting is swiched to OFF
9-7. FACTORY DEFAULT
: RECALL roads and saves the factory defaults.
A. EXIT
A-1. SAVE&EXIT : Save all the setting and exit the main menu
A-2. EXIT : Exit the main menu without save.
(default: AUTO)
(default: TVI)
(default: NO)
19
●
( long push 1~2 sec.)