Vitek VTC-C2BTS2 Manual page 15

Operating Instructions
7-2. SHARPNESS
(default: 10)
7-3. COLOR GAIN
(default: 10)
7-4. GAMMA
(default: 0.5)
7-5. SHADING
(default: OFF)
ON enables to compensate the shade caused by wide lens setting.
8. SPECIAL
SPECIAL
MIRROR/FLIP
PRIVACY
MOTION
PIXEL DEFECT
TITLE SET
DISPLAY
DEFOG
POINTING ZOOM
PRESET ZOOM
RETURN
8-1. MIRROR/FLIP
(default: OFF)
: Reverses the video left and right and/or up and down by MIRROR/FLIP.
• OFF : Normal display without mirroring or flipping
• Hor. : Video is reversed left and right
• Ver. : Video is reversed upside down
• HV : Video is reversed left and right and upside down.
When the video is reversed by Ver. or HV, then the joystick directions are
reversed accordingly. This feature is very useful when a camera installed
upside down.
8-2. PRIVACY
: 10 Privacy zones which can be enabled individually by ZON DISP are
available to mask the video.
• PRIVACY ALL: ON enables all Privacy Zones you set.
• ZONE NUM: Set a number to select a privacy zone from 1~10.
• ZONE DISP : ON enables to display relevant privacy zone
• H-POS, V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
: Adjusts the sharpness of video(0~20).
: Adjusts the color level of video(0~20).
: Adjusts the gamma of video.
:
OFF
OFF
OFF
OFF
OFF
OFF
RET
15