Nr-2100 Series - Brickcom NR-1100 series User Manual

1.2.2 NR-2100 Series

Note:
**To turn off your NVR, long pressing power button at least 2 seconds.
**To turn on your NVR, long pressing power button at least 3 seconds.
Note: To reset to default, please follow below methods:
Press the power button twice with the interval of one second. In other words, please
press the power button in the 1
second. It will be easier to operate the reset to default with the assistance of watch
or clock.
Note: Once users press reset button, configuration of Camera Setting, Recording
Settings, Event & Action Setting, E-Mail Settings, and Server Settings will reset to
default. It is advised to backup system configurations. For more information, refer to
detail information in user manual
Figure 2-4. NR-2100 Series Front Panel
st
second and press the power button again in the 2
5.6.3 Save/Load Configuration.
8
nd