Auto Start Mode; Reset Password Setting; Bluetooth Setup Setting - acaia lunar Operation Manual

Auto Start Mode

1. The default Auto Start Mode with Droplet and Square Setting is set to ON, which means this
mode is enabled.
2. ON: The Auto Start Mode with Droplet and Square is enabled.
3. OFF: The Auto Start Mode with Droplet and Square is disabled.
4. Press and hold
option.
Auto Start Mode
1. The default Auto Start Mode with Triangle and Square Setting is set to ON, which means this
mode is enabled.
2. ON: The Auto Start Mode with Triangle and Square is enabled.
3. OFF: The Auto Start Mode with Triangle and Square is disabled.
4. Press and hold
selected option.
Reset Password Setting [ rESEt.d ]
1. Select [ YES ] to clear the bluetooth connection password.
2. Press and hold
Bluetooth Setup Setting [ bt_SEt ]
1. OFF: The bluetooth is disabled. The scale does not allow any bluetooth connection.
2. ON: The bluetooth is enabled. The scale allows bluetooth connection. User may connect the
scale with acaia Apps.
3. Press and hold
Chapter 4: Configuration
Setting[ NodE_4 ]
button for 1 second until [ NodE_5] is shown on LED to confirm the selected
Setting[ NodE_5]
button for 1 second until [ rESEt.d ] is shown on LED to confirm the
button for 1 second until [ bt_SEt ] is shown on LED to clear the password.
button for 1 second until [ SLEEP ] is shown to confirm the modification.
24