PPPoE
PPPoA
RFC1483 Bridged VPI/VCI, VC-based/llC-based multiplexing to use
RFC1483 Routed
1. Click "Run Wizard" to start the configuration.
2. Click "next" to continue.
3. set and confirm the new
password; click "next"
to continue.
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password (and service name).
VPI/VCI, VC-based/llC-based multiplexing, Username,
Password.
bridged Mode.
VPI/VCI, VC-based/llC-based multiplexing, IP address,
subnet Mask, Gateway address and domain name
system (dns) IP address (a fixed IP address).