Nearest Airports - Garmin gns 430 Quick Refence

To View a List of the Nearest Airports
1. From any page, press and hold
this step if you are already viewing any of the main GPS pages.)
d
2. Rotate the large right knob (
select the NRST page group. “NRST”
will appear in the lower right corner of
the screen.
3. If necessary, rotate the small right
knob ( ) to select the nearest airport
a
page.
To Scroll Through the List of Nearest Airports
1. Press the small right knob ( ) to activate the cursor.
r
d
2. Rotate the large right knob (
right-hand side of the page will indicate which part of the list is currently being
viewed.
3. To remove the flashing cursor, press the small right knob (
To View Additional Infor-
mation for a Nearby Airport
1. Highlight the identifier of the desired
airport by scrolling through the list, as
described in the procedure above.
E
2. Press to display the airport
location page for the selected airport.

Nearest Airports

c
to select the default NAV page. (You may skip
) to
) to scroll through the list. The scroll bar along the
).
r
3. To view additional WPT pages for the
selected airport (including the airport
runway and airport frequency pages)
press the small right knob ( ) to
r
remove the flashing cursor. Rotate
the small right knob ( ) to display
a
the additional WPT pages. When fin-
ished, press the small right knob (
4. To return to the nearest airport page, verify that “Done?” is highlighted by the flashing
E
cursor and press (or press
To Select a Nearby Airport as a Direct-To Destination
1. Press D to display the select direct-to waypoint page.
d
2. Rotate the large right knob (
place the flashing cursor on the near-
est airport (NRST) field.
3. Rotate the small right knob (
a
display a window, listing up to nine
nearest airports.
4. Continue rotating the small right knob (
E
5. Press to accept the selected waypoint’s identifier and press
time (with “Activate?” highlighted) to begin navigating to the selected waypoint.
To Quickly Tune and Activate the 121.500 Emergency
Channel
W
1. Press and hold for approximately two seconds.
) to return the flashing cursor to the screen.
r
c
).
) to
) to
) to highlight the desired airport.
a
E
a second
11