Nearest Airports - Garmin GNS 530 Quick Reference

Scrolling through the list of frequencies:
1) Activate the cursor, if not already active, by
pressing the small right knob.
Turn the large right knob to move the cursor
2)
through the list of frequencies. If there are
more frequencies in the list than can be
displayed on the display, a scroll bar along the
right-hand side of the display indicates which
part of the list is currently being displayed.
Auto-tuning a frequency from the NAV/
COM Page:
1) Highlight the desired frequency by scrolling
through the list of frequencies, as described in
the preceding procedure.
2) To place a frequency in the standby field of the
COM or VLOC Window, highlight the desired
frequency and press the ENT Key.
bottom Row ANNUNCiAtoRS ANd
meSSAGeS
See Pilot' s Guide for detailed information.
TAWS/TERRAIN CDI/RAIM Mode
ANNUNCIATOR Approach,
PULLUP, TERRAIN, Enroute,
Oceanic,
TERRAIN (Flashing),
Terminal,
TER FAIL,TER INHB,
TER N/A, TER TEST '0.30' (for
VLOC approaches)
OBS Mode
Integrity Failure
INTEG
Position Warning
Blank (for auto-
WARN (RAIM protection
sequencing)
limit failure)
190-00181-01 Rev. G
Page Group Indicator
NAV, WPT, AUX, NRST,
FPL, DRCT, PROC, MSG
Waypoint Alert
NEXT DTK, etc.
Turn Advisory
TURN TO_, etc.
Message Annunciator
Suspend,
On,
OBS,
Flashing (new message),
Blank (no message)
GNS 530(A) Quick Reference

NEAREST AIRPORTS

Viewing a list of nearest airports:
Turn the large right knob to select the NRST
1)
Page Group. 'NRST' will appear along the
bottom of the display.
2) If necessary, turn the small right knob to select
the Nearest Airport Page.
Scrolling through the list of nearest airports:
1) From the Nearest Airport Page, press the small
right knob to activate the cursor.
2) Turn the large right knob to scroll through the
list. The scroll bar along the right-hand side of
the page will indicate which part of the list is
currently being viewed.
3) To remove the flashing cursor, press the small
right knob.
15