Draytek vigor2960 series User Manual page 361

2. Simply click the Add button.
3. The following dialog will appear.
Available parameters are listed as follows:
Item
Profile
IP Address
Port
Scaling
Apply
Cancel
4. Enter all of the settings and click Apply.
5. A new SSL Application profile has been created.
Vigor2960 Series User's Guide
Description
Type the name of the profile that you create.
Type the IP address for this protocol.
Specify the port used for this protocol. The default setting is
5900.
Chose the percentage (100%, 80%, 60%) for such
application.
Click it to save the configuration.
Click it to exit the page without saving the configuration.
353