Draytek vigor2960 series User Manual page 323

LDAP profiles
DHCP from
DHCP Relay
PPTP MSS
NetBIOS Naming
Packet
Multicast Packet via
VPN
PPTP Acceleration
Apply
Cancel
4 4 . . 9 9 . . 4 4 . . 2 2
This page display current status for VPN tunnel built with L2TP protocol.
Vigor2960 Series User's Guide
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
selections.
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host
in the LAN.
Type the maximum segment size (MSS) for PPTP VPN
tunnel.
Pass – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Block – When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Some programs might send multicast packets via VPN
connection.


Enable – Click it to make PPTP acceleration for VPN.
Click it to save the configuration.
Click it to discard the settings configured in this page.
L L 2 2 T T P P
Pass – Click this button to let multicast packets pass
through the router.
Block – This is default setting. Click this button to let
multicast packets be blocked by the router.
315
to remove current object