Draytek vigor2960 series User Manual page 278

4 . 7 . 5 . 2 I n t e r n a l R a
4 . 7 . 5 . 2 I n t e r n a l R a
In addition to specifying an external RADIUS server for security authentication, Vigor router
also can be treated as a RADIUS server for performing security authentication and offer the
RADIUS service for wireless clients.
Available parameters are listed as follows:
Item
Enable RADIUS Server
Interface
Port
Authentication Client
Apply
Cancel
After finished the above settings, click Apply to save the configuration.
Note: "Allow Radius Server Login" can be enabled from the configuration page in User
Management>>User Profile. It allows the clients to be authenticated by internal
RADIUS server of Vigor router.
d i u s S e r v e r
d i u s S e r v e r
Description
Check this box to make Vigor router as a RADIUS server.
Only the clients from the selected interface can be
authenticated by Vigor RADIUS server.
Clients can use the specified port number to exchange
RADIUS information.
Only the clients specified in this field can be authenticated
by Vigor RADIUS server.
Click it to save the configuration.
Click it to discard the settings configured in this page.
270
Vigor2960 Series User's Guide