Draytek vigor2960 series User Manual page 411

HTTPS Allow
FTP Allow
Server Certificate
Access List
IP List
Allow Ping from WAN
LAN Access Control
Allow management from
LAN
Apply to LAN Subnet
Web Allow
Telnet Allow
SSH Allow
HTTPS Allow
FTP Allow
Allow Ping form LAN
Management Port Setup
Web Port
Telnet Port
SSH Port
HTTPS Port
Vigor2960 Series User's Guide
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
Click Enable to allow system administrator to login from the
FTP server and management the web page of the router.
Use the default setting.
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
Type the first IP address for the system administrator to
login.
The former boxes indicate the IP address allowed to login to
the router, and the later box indicates a subnet mask allowed
to login to the router.
Click Enable to allow system administrator to ping the router
from WAN interface.
Click Enable to control such router from LAN.
Choose the LAN profile(s) that the IPs controlled under such
profile are allowed to access into the web user interface of
Vigor2960.
Click Enable to allow system administrator to login from the
Internet and management the web page of the router.
Click Enable to allow system administrator to login from the
telnet and management the web page of the router.
Click Enable to allow system administrator to login from the
SSH server and management the web page of the router.
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
Click Enable to allow system administrator to login from the
FTP server and management the web page of the router.
Click Enable to allow system administrator to ping the router
from LAN interface.
Type the port number for the management through web
page.
Type the port number for the management through telnet
page.
Type the port number for the management through SSH
server.
Type the port number for the management through HTTPS
server.
403