Draytek vigor2960 series User Manual page 394

Available parameters are listed as follows:
Item
Profile
Enable
TX Limit(Kbps)
RX Limit(Kbps)
Mode
general target
Description
Type the name of the profile.
Check this box to enable such profile.
Define the limitation for the speed of the upstream. If you do
not set the limit in this field, the system will use the default
speed for the specific limitation you set for each index. Do
not type the value with "0", otherwise the profile cannot be
saved.
Define the limitation for the speed of the downstream. If you
do not set the limit in this field, the system will use the
default speed for the specific limitation you set for each
index. Do not type the value with "0", otherwise the profile
cannot be saved.
Select Each to make each IP within the range of Start IP and
End IP having the same speed defined in TX limit and RX
limit fields; select Shared to make all the IPs within the
range of Start IP and End IP share the speed defined in TX
limit and RX limit fields.
Time Object - Click the triangle icon
profile selection box. Choose a schedule object profile to be
applied on such rule. You can click
new time object profile.
386
to display the
to create another
Vigor2960 Series User's Guide