Change User Password; Clear User Password; Password Check - DFI LR100-N16 Series User Manual

Change User Password

This field is used to set or change the user password.
To set a new password:
1. Select the Change User Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are limited to
eight letters/numbers.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
After you have set the user password, the Clear User Password and Password
Check fields will appear.

Clear User Password

To clear the password, select Clear User Password then press <Enter>. The Pass-
word Uninstalled dialog box will appear.

Password Check

Setup
The BIOS checks for the user password whenever accessing the Setup utility.
Always
The BIOS checks for the user password when accessing the Setup utility and
booting the system.
BIOS SETUP UTILITY
: Not Installed
: Not Installed
[Disabled]
Enter New Password
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS Setup
Security
Install or Change the
password.
Select Screen
← →
Select Item
↑↓
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
3
75