Security - DFI LR100-N16 Series User Manual

Security

Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Change Supervisor Password
This field is used to set or change the supervisor password. To set a new pass-
word:
1. Select the Change Supervisor Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are limited to
eight letters/numbers.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
PCIPnP Boot
: Not Installed
: Not Installed
BIOS SETUP UTILITY
: Not Installed
: Not Installed
[Disabled]
Enter New Password
BIOS Setup
Security Chipset
Install or Change the
password.
Select Screen
← →
Select Item
↑↓
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security
Install or Change the
password.
Select Screen
← →
Select Item
↑↓
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
3
Exit
73