DFI LR100-N16 Series User Manual page 33

Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or
USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To
use this function:
• Jumper Setting
JP2, JP3 and/or JP4 must be set to "2-3 On: 5V_standby". Refer to "USB
Power Select" in this chapter for more information.
• BIOS Setting
"USB Device Wakeup From S3" in the Advanced menu ("ACPI Configuration"
submenu) of the BIOS must be set to Enabled. Refer to chapter 3 for more
information.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB
ports, the 5V_standby power source of your power supply must support
≥1.5A. For 3 or more USB ports, the 5V_standby power source of your
power supply must support ≥2A.
Hardware Installation
2
33