Super Io Configuration - DFI LR100-N16 Series User Manual

3
BIOS Setup

Super IO Configuration

This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Configure Super IO Chipset
Serial Port1 Address
Serial Port1 IRQ
Serial Port2 Address
Serial Port2 IRQ
Serial Port3 Address
Serial Port3 IRQ
Serial Port4 Address
Serial Port4 IRQ
PWRON After PWR-Fail
W83627DHG.WDT Time
Serial Port1 Address to Serial Port4 Address
Auto
The system will automatically select an I/O address for the onboard serial
ports.
3F8, 2F8, 3E8, 2E8
Allows you to manually select an I/O address for the onboard serial ports.
Disabled
Disables the onboard serial port 1 and/or serial port 2.
Serial Port1 IRQ to Serial Port4 IRQ
Select an IRQ for the onboard serial ports. This is not configurable if the Se-
rial Port Address fields are set to Disabled.
60
BIOS SETUP UTILITY
Advanced
[3F8]
[4]
[2F8]
[3]
[3E8]
[10]
[2E8]
[11]
[Off]
[000]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Allows BIOS to select
Serial Port 1 base address.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit