Change User Password - DFI SR100-L20C User Manual

After you have set the supervisor password, the User Access Level
field will appear.
Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level

Change User Password

Password Check
Boot Sector Virus Protection
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
User Access Level
Selects the access level to the fields in the Setup utility.
Limited Allows you to change settings to some fields such as
Date and Time.
No Access Prevents access to the Setup utility.
View Only Allows you to view the settings but does not allow
you to change the settings.
Full Access Allows you to change settings to all the fields in the
utility.
Change User Password
This field is used to set or change the user password.
To set a new password:
1. Select the Change User Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You
are limited to eight letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
BIOS SETUP UTILITY
PCIPnP Boot
: Installed
: Not Installed
[Full Access]
[Setup]
[Disabled]
BIOS Setup
Security Chipset
Limited: only limited
fields to be changed.
No Access: prevent
user access Setup
Utility.
View Only: allow
access but the fields
can not be changed.
Full: allow change
except Supervisor
password.
← →
Select Screen
↑↓
Select Item
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3
Exit
71