Combination Switch; Hazard Warning Flasher; High-Beam Flasher; High-Beam Headlamps - Mercedes-Benz 2009 S-Class Operator's Manual

Controls in detail
Lighting

Combination switch

High beam
1

High-beam flasher

2
High beam
X
Turn the exterior lamp switch to position
( Y page 325).
B
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
in the instrument cluster comes on.
A
X
Switching off: Pull the combination switch
in direction of arrow to its original
2
position.
328
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.

Turn signals

Turn signals, right
1
Turn signals, left
2
X
Press the combination switch in direction
of arrow or 2.
1
The corresponding turn signal indicator
lamp or in the instrument
L K
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.

Hazard warning flasher

The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch.
The hazard warning flasher comes on
automatically when an air bag deploys.
S 600 and S 65 AMG, USA only:
The hazard warning flasher comes on
automatically when you brake the vehicle
strongly at a speed of more than 50 mph
(70 km/h) and bring it to a complete stop.
Hazard warning flasher switch
1