Mercedes-Benz 2009 S-Class Operator's Manual page 236

Control systems
COMAND seats
Scale
1
Cursor
2
Current seat
3
Current setting
4
X
Select seat ( Y page 233).
X
Adjusting lumbar support: Slide
rotate until desired setting is
ymz
reached.
X
Confirming selection: Press n.
X
Switching to the bottom menu line: Slide
omp.
X
Confirming selection: Press n.
i After you have pressed O, the seat last
adjusted is active.
234
Multicontour seats, front
®
i If PRE-SAFE has been activated, the air
pressure in the air chambers (on the sides
of the seat cushion and seat backrest) of
the front multicontour seats is increased.
i When you adjust the multicontour seat,
noises may result from pumping air into or
releasing air out of the air chambers.
To support the spine, you can individually
adjust the seat backrest contour of the front
seats by regulating the air pressure in the air
chambers of the multicontour seat.
You can adjust the following air chambers:
sides of seat cushion
R
sides of seat backrest
or R
omp
seat backrest curvature in lumbar area
R
seat backrest curvature in shoulder area
R
The settings are made on the COMAND
display.
Adjusting sides of seat cushion
This function is used to adjust the air
chambers in the sides of the seat cushion.
X
Select seat ( Y page 233).
X Selecting Seat sides: Slide
rotate ymz.
X
Confirming selection: Press n.
A scale appears.
Scale
1
Cursor
2
Current setting
3
X
Slide or rotate until desired
qmr ymz
setting is reached.
X
Saving setting: Press n.
Adjusting seat backrest sides
This function is used to adjust the air
chambers in the seat backrest sides.
or
omp