Mercedes-Benz 2009 S-Class Operator's Manual page 571

X
Take out bulb holder 1.
X
Take bulb out of holder 1.
X
Insert new bulb into bulb holder
press it all the way down.
X
Insert bulb holder into guide in
1
headlamp.
The tab of the bulb holder
1
positioned on the upper left-hand side and
wire must point downward and to the
3
left (driver's side headlamp) or upward and
to the right (passenger-side headlamp).
X
Turn bulb holder clockwise until it
1
engages and grip is in a horizontal
2
position.
X
Attach housing cover ( Y
2
let it audibly engage to close.
IR emitter lamp bulb
and
1
must be
Bulb
1
Wire position
2
X
Turn cover
page 567) and
counterclockwise and remove it.
X
Turn bulb
disengages.
X
Take out bulb 1.
X
Press both catches on left and right sides
of bulb
1
bulb.
X
Connect a new bulb
X
Insert bulb
Wire must point downward and to the
2
right.
( Y page 567)
1
counterclockwise until it
1
and disconnect the wire from the
to the wire.
1
into guide in headlamp.
1
Practical hints
Replacing bulbs
X
Turn bulb clockwise until it engages.
1
Wire now points downward and to the
2
left.
X
Attach housing cover ( Y
1
let it audibly engage to close.
Replacing bulbs for rear lamps
Tail lamp unit
The tail lamps are equipped with HiP bulbs
and LEDs. Have them replaced at an
authorized Mercedes-Benz Center.
page 567) and
Z
569